Pages

July 28, 2012

nursery progress!

Before
Step 1: We measured the room and bought enough beadboard from home depot to cover the walls (they come 4x8 boards so we had them cut the boards down to 4x5ft3in)
We nailed the boards up with a nail gun. The hardest thing about this step was cutting the holes for the electrical outlets. 
Then we realized that we had to pull the plug out of the wall a little bit and screw it to the beadboard.


Step 2: Put up moulding on top of the beadboard. 

Step 3: Andy got the crown moulding from home depot also.  We measured the room first and wrote down the measurements and had home deport cut them BUT they don't cute anything at an angle so we ended up doing a straight cut and adding these little corner blocks. 

One more wall to go!


Next steps, a LOT of caulk to fill in the gaps then painting! Hopefully it will all be done at the end of this weekend :)

No comments:

Post a Comment